Masonry Cleaning and Sealing in the City of Syracuse

In the City of Syracuse, 1.5 percent of the mapped soil area is classed poorly drained, somewhat poorly drained or very poorly drained, and 54.0 percent is classed well drained. About 22.0 percent of the city is mapped as urban land with no natural drainage class, and the largest natural soils are Palmyra gravelly loam on 0 to 3 percent slopes at about 9.4 percent and on 3 to 8 percent slopes at about 6.7 percent. Palmyra is well drained hydrologic group A, the fastest-infiltrating group there is, and Honeoye silt loam adds a further 11.9 percent.

Source: United States Department of Agriculture, Natural Resources Conservation Service, Soil Survey Geographic Database for Onondaga County New York, survey area NY067, queried through the Soil Data Access service, accessed 2026-09-14

The City of Syracuse issues residential construction permits for one and two family homes and names the work that needs one, including retaining wall, driveway, fence, deck, porch, gazebo and pergola, shed and garage, and a miscellaneous category covering chimney and foundation or site work. Its published list of work needing no permit includes sealing or adding an additional layer of tarvia to a driveway, but does not include building a new driveway. Neither list names a patio at grade.

Source: City of Syracuse, Central Permit Office, Residential Construction Permits, accessed 2026-09-14

Onondaga County's Green Improvement Fund does fund porous pavement, but not for homeowners. The program describes itself as supporting green infrastructure on commercial, business and not-for-profit owned properties in the Clinton, Harbor Brook and Midland combined sewersheds, which are select areas within the City of Syracuse. Eligible measures include rain gardens, bioretention, dry wells, underground infiltration systems, green roofs, porous pavement, tree plantings, planter boxes and cistern systems. The program reports over 11.6 million dollars awarded across 98 completed projects, and its page states that it is not currently accepting applications.

Source: Onondaga County, Save the Rain, Green Improvement Fund, accessed 2026-09-14

Ranked by the share of housing units built in 2000 or later, the era in which adhered stone veneer and segmental paver hardscape became the dominant new masonry products, the places of this metro spread very widely. Radisson, the census place inside the Town of Clay, leads at 32.4 percent, followed by the Town of Lysander at 25.8 percent, the Town of Van Buren at 21.9 percent, Baldwinsville village at 20.1 percent, the Town of Cicero at 19.1 percent, the Town of Clay at 15.4 percent, the Town of Camillus at 15.2 percent, the Town of Manlius at 11.6 percent, the Town of Marcellus at 11.3 percent, the Town of Skaneateles at 11.2 percent, Marcellus village at 9.9 percent, the Town of DeWitt at 8.7 percent, Skaneateles village at 8.4 percent, Fayetteville village at 8.1 percent, the Town of Salina at 7.0 percent, the City of Syracuse at 6.4 percent, Camillus village at 6.4 percent, Liverpool village at 6.1 percent, North Syracuse village at 4.7 percent, Manlius village at 4.5 percent, and both East Syracuse village and Solvay village at 0.0 percent. The county figure is 11.6 percent.

Source: US Census Bureau, American Community Survey 2020-2024 5-year estimates, table B25034 Year Structure Built and table B25035 Median Year Structure Built, accessed 2026-09-14

Efflorescence needs three things at once. Technical Note 23A states that soluble salts must be present within or in contact with the masonry, that a source of water must be in contact with the salts long enough to dissolve them, and that a pore structure must be present that allows the salt solution to migrate to a surface where the water can evaporate, driven by a temperature or humidity gradient. It adds that the assumption that the brick causes efflorescence is usually incorrect, because the soluble compounds most commonly originate in the materials in contact with the brick, such as mortar, grout, concrete masonry, concrete or soil.

Source: Brick Industry Association, Technical Note 23A, Efflorescence: Causes and Prevention, accessed 2026-09-14

The hardscape equivalent of the same problem has a named failure mode. The sealing guidance lists the conditions under which a sealer or liquid stabilizer will whiten on a paver surface: the surface and joints are not dry, the pavers have not had an adequate period of exposure to moisture, there is a source of efflorescence under the pavers in the sand, base or soil moving up through the joint sand or the pavers, or the sealer is not breathable, meaning it does not allow moisture to move through to the surface of the paver and evaporate. It adds that if the base under the pavers drains poorly, the sealer is applied to saturated joint sand, or it is applied too thick, the sealer can become cloudy and diminish the appearance of the pavers, and in that situation the sealer must be removed or re-dissolved.

Source: Concrete Masonry and Hardscapes Association, PAV-TEC-005, Cleaning, Sealing and Joint Sand Stabilization of Interlocking Concrete Pavement, accessed 2026-09-14

Sealing is a recurring appearance choice, not a one-time structural upgrade. The guidance states that sealers are applied to add further protection from stains, oils, dirt or water, that most sealers change the appearance of the paver surface by darkening it and enhancing the surface color, and that sealers normally require reapplication after a period of wear and weather, with the interval depending on use, climate and the quality of the sealer. It separately notes that joint sand stabilizers and sealers are two distinct products with overlapping functions, the stabilizer's primary job being to keep joint sand in place against flowing water, wind, aggressive cleaning, tire action and the intrusion of organic matter, seeds and insects.

Source: Concrete Masonry and Hardscapes Association, PAV-TEC-005, Cleaning, Sealing and Joint Sand Stabilization of Interlocking Concrete Pavement, accessed 2026-09-14

A sealer can make the problem worse in a specific, documented way. Technical Note 23A states that applying a coating to brickwork that has a tendency to effloresce, without stopping the mechanisms causing that efflorescence, may lead to degradation of the masonry, and that applying a coating that inhibits evaporation may also lead to degradation. As water and dissolved salts travel toward a coated surface they may be stopped at the inner margin of the coating, usually 1/8 to 1/4 inch below the surface, where the water evaporates through the treated zone as vapor and the salts crystallize inside the masonry. That is called cryptoflorescence or subflorescence, and the Technical Note states these salts can develop tremendous pressures which may result in brick spalling. For that reason, coatings are not recommended as the sole treatment for efflorescence problems.

Source: Brick Industry Association, Technical Note 23A, Efflorescence: Causes and Prevention, accessed 2026-09-14

Masonry should not be cleaned during freezing weather or when freezing weather is expected, because most cleaning methods saturate the wall with water and that water can freeze on or inside the masonry and damage it. Technical Note 1 recommends that water-based cleaning methods be used only if the ambient temperature will be 40 degrees Fahrenheit or above and will remain so until the brickwork is dry.

Source: Brick Industry Association, Technical Note 1, Hot and Cold Weather Construction, accessed 2026-09-14